- Fishing Line Spooler System A111
The use of sophisticated composite fiber fixture head, reducing the rubbing of the old winding audio, to ensure that no noise is released, winding even more comfort ， Applicable to the majority of spindles
fish Rod securing lever clamping size ：.
1. Fixture can be turned 180 degrees, using the CONVEX surface of locking bar of the sihing rod.the thinner fishing pole( size 5-15mm/ 0.2-0.6 in) can be secured; utilizing the CAMBER concave can clamp the thicker fishing pole (size 15-28mm/ 0.6-1.1 in),.
2. Clamping bobbin variety: 5mm-23mm (0.2-0.9 in) birthed, 10mm-145mm (0.4-5.7 in) thickness of the reel procedure.
1. unscrew the little screw cap on the securing arm and put the shaft on the securing arm into the bearing of main body carefully screwing the little screw cap on the lock arm shaft.fix them with each other( do n`t tighten the tiny screw cap too firmly, or it will slide easily.).
2. set up the line winder, secure the deal with. screw at the other side of the securing arm.
3. Using pole securing pole concave convex surface locking in the fishing pole （ the clamping force is slightly big than the line winder weight will be fantastic to avoid the damages to fish rod ）.
4. install the fish line to the fish line spooler, readjusting the securing take care of and also the clamping force.
5. winding the fish line on the fish reel, after that you can begin winding.